Cleaner Head (Wiper) - Epson Stylus Pro 7600 Service Manual

EPSON Stylus Pro 7600/9600

4.6.5 Cleaner Head (Wiper)

1. Remove the Maintenance ASSY.
2. Using tweezers, disengage the dent of the Cleaner Head from the projection on the
Cleaner Head Holder and pull off the Cleaner Head.
If you touch the Cleaner Head with a bare hand, the head
C A U T I O N
nozzle can be stopped up with ink repelled by fat from your
hand. For handling the Cleaner Head, be sure to use tweezers;
never touch the Cleaner Head with your bare hand.
Before use, clean the tweezers with cleaner.
Install the Cleaner Head in such an orientation that its felt is
positioned on the Pump ASSY side and the rubber in on the Cap
ASSY side.
Disassembly & Assembly
(See p.199)
Disassembly and Assembly of Cleaning Mechanism
Rubber side
Cleaner Head
Figure 4-78. Removing the Cleaner Head
Revision A
Felt side
203