Roll Paper Cover - Epson Stylus Pro 7600 Service Manual

EPSON Stylus Pro 7600/9600

4.2.8 Roll Paper Cover

1. Open the Roll Paper Cover. (See Figure 4-20)
2. Remove two screws (CPS: M4×8) securing the black spindle support (Spindle Support
L) on the left, and then remove the spindle support.
3. Remove the two screws (CPS: M4×8) and one screw (M4×12)securing the gray
spindle support (Spindle Support R) on the right, and then remove the spindle support.
(See Figure 4-20)
When installing the white spindle support (Spindle Support R),
install the transparent washer, wave washer and printer body
frame on the outside of the Roll Paper Cover in the named order.
Disassembly & Assembly
Transparent washer
Wave washer
Removing the Panel Unit and Housing
Screws (CPS: M4×8) ×2
Spindle Support L
Figure 4-20. Roll Paper Cover removal
Screws (CPS: M4×8) ×2
Screw (M4×12)
Figure 4-21. Roll Paper Cover removal
Revision A
Roll Paper Cover
Spindle Support R
169