Epson Stylus Pro 7600 Service Manual page 157

EPSON Stylus Pro 7600/9600
4.2.3 L Side Cover (p.163)
4.2.4 I/H Cover (p.164)
4.5.3 Cover Sensor ASSY (p.197)
4.5.1 C472_SUB-B Board (p.192)
4.4.1 PF Motor (p.185)
4.4.2 PF Encoder Sensor ASSY (p.186)
4.4.3 Cautions when replacing the PF Loop Scale (p.187)
4.5.2 I/H (Ink Holder) ASSY (p.193)
Release Sensor (I/H Lever) (p.193)
CSIC Relay Board (p.193)
Note: The italic bold characters represent
consumables or regular replacement parts.
Disassembly & Assembly
4.2.1 Panel Unit (p.159)
4.2.2 R Side Cover (p.160)
4.2.5 H Top Cover (p.165)
4.3.1 Print Head (p.171)
4.3.2 Damper ASSY (p.173)
4.3.3 CR Board ASSY (p.174)
4.3.4 Cutter Section (p.175)
4.3.4.1 Cutter Holder ASSY (p.175)
4.3.4.2 Cutter Solenoid (p.177)
4.3.5 CR Encoder Sensor ASSY (p.178)
4.3.6 P_EGDE Sensor ASSY (p.179)
4.3.7 CR Motor ASSY (p.180)
4.3.8 HEAD_SLIDE Sensor ASSY (p.182)
4.3.10 CR Encoder Scale (Timing Fence)
(p.184)
4.4.5 P_THICK Sensor/P_THICK Sensor_0.3
ASSY (p.190)
4.4.6 P_REAR Sensor ASSY (p.191)
Figure 4-2. Disassembly Process Flowchart
Summary
4.2.8 Roll Paper Cover (p.169)
4.2.7 Paper Guide L2 (p.168)
4.2.6 Rear Cover (p.166)
4.3.9 CR_HP Sensor ASSY
(p.183)
4.4.4 Suction Fans (p.189)
4.6.6 Flushing Box ASSY (p204)
4.6.1 Maintenance ASSY Removal (p.199)
4.6.2 Pump Motor ASSY (p.200)
4.6.3 Cap ASSY (p.200)
4.6.4 Pump ASSY (p.201)
4.6.5 Cleaner Head (Wiper) (p.203)
4.2 Removing the Panel Unit and Housing (p.158)
4.3 Disassembly and Assembly of Carriage (CR) Mechanism (p.171)
4.4 Disassembly and Assembly of Paper Feed Mechanism (p.185)
4.5 Disassembly and Assembly of Ink Supply Mechanism (p.192)
4.6 Disassembly and Assembly of Cleaning Mechanism (p.198)
4.7 Disassembly and Assembly of Circuit Boards (p.205)
Revision A
4.2.9 Front Cover (p.170)
4.7.1 Power Supply Board (p.205)
4.7.2 AC Inlet (p.206)
4.7.3 MAIN Board (C472 MAIN) (p.207)
157