Actuator; Actuator 2 - Epson Stylus Pro 7600 Service Manual

EPSON Stylus Pro 7600/9600

5.2.2.8 Actuator

You can operate actuators. (See Figure 5-14)
CUTTER
The cutter is moved up and down by operating on the panel.
Neither pressing the [Paper Feed +] key with "UP" displayed nor pressing the
[Paper Feed -] key with "DOWN" displayed works.
Upon passage of 60 seconds with the cutter in the down position, it will
automatically move up.

5.2.2.9 Actuator 2

You can operate actuators. (See Figure 5-16)
When you try to return to the top menu of test after execution of any item of
Actuator 2, "Turn Power OFF" will be displayed.
Adjustment
(See Figure 5-15)
Self-diagnostic Function
[SelecType]
Cutter :
? ?
[Pause]
[Items]
Figure 5-14. Menu Transition of Actuator
Cutter :
?
Cutter :
?
Figure 5-15. Menu Transition of Cutter
Cutter Sole.
? ?
[Paper Feed ∆]
[Paper Feed ∇]
Pump Motor
? ?
[Paper Feed ∇] [Paper Feed ∆]
Figure 5-16. Menu Transition of Actuator 2
Revision A
[Enter] Start
Cutter :
? UP
UP
DOWN
[SelecType]
[Enter] Start
[Pause] [Items]
[Enter]
[Pause] End
229