Surrounding Space - Epson Stylus Pro 7600 Service Manual

EPSON Stylus Pro 7600/9600

1.2.9.4 Surrounding Space

Provide the printer with an enough surrounding space to ensure proper installation of
accessories and replacement of consumables and easy work for daily maintenance.
From the front of the printer:
From the rear and both sides of the printer: 15 cm or more
When Stylus Pro 7600 is not equipped with the dedicated stand:
Stylus Pro 7600 ejects paper downward. To prevent the ejected paper from
being obstructed, install the printer on a table or desk 60 to 80 cm high above
the floor and provide the printer with a 60 cm or more space in front.
In doing so, locate the front rubber feet of the printer close to the front end of
the table or the desk.
Product Description
60 cm or more
Basic Specifications
Stylus Pro 7600
(without stand)
15 cm or more
60~80 cm or more
Stylus Pro 7600 (with stand)/
Stylus Pro 9600
15 cm or more
Figure 1-3. Surrounding Space
Revision A
15 cm or more
15 cm or more
60 cm or more
15 cm or more
15 cm or more
60 cm or more
* Shown above is Stylus Pro 7600
25