Bk Ink Cartridge Replacement - Epson Stylus Pro 7600 Service Manual

EPSON Stylus Pro 7600/9600

1.4.3.35 BK ink cartridge replacement

This menu is only displayed for pigment model. It is not displayed
C H E C K
for dye model.
P O I N T
The printer is not turned off during sequence even if Power button
is pushed.
1. Select "BK INK CHANGE" in "MAINTENANCE" of panel setting menu and
start with "EXEC".
2. Select changing ink and push the Enter button. (The panel message is depended on
installed ink combination at that time.)
LCD panel message: "SELECT INK SET"
Installed ink set
MATTE-K+LIGHT-K
MATTE-K+MATTE-K #1 MAT:#2 LBK
PHOTO-K+LIGHT-K
3. The printer checks available quantity of all color ink remaining for initial filling
except changing slot.
1.
When ink remaining is enough, go to (4). When ink remaining is not enough,
following message is displayed, and corresponded slot LED blinks.
LCD panel message: "NOT ENOUGH INK"
"RELEASE INK LEVER"
2.
Following message is indicated, and corresponded slot LED blinks until lever
is released, and new ink cartridge is installed.
LCD panel message: "REPLACE WITH NEW CARTRIDGE"
3.
Following message is displayed, when new ink cartridge is installed, and
CSIC is contacted.
LCD panel message: "SET INK LEVER"
Product Description
Panel message
#1 PHOTO:#2 LBK
#1 MAT:#2 MAT
#1 PHOTO:#2 LBK (2 cartridges)
#1 MAT:#2 LBK
#1 MAT:#2 MAT (2 cartridges)
4.
The printer reads CSIC of installed cartridge after the lever is locked.
a) When all ink remaining except changing slot is enough for initial filling,
go to step 4.
b) When wrong ink cartridge is installed, following message is displayed
every 1 second, corresponded slot LED blinks, and go back to step 3-2.
LCD panel message: "WRONG CARTRIDGE"
c) When installed ink cartridge is not enough for initial filling, following
message is displayed every 1 second, corresponded slot LED blinks, and
go back to step 3-2.
LCD panel message: "NOT ENOUGH INK"
4. Following messages are displayed every 1 second repeatedly, and all slot LEDs
are OFF, after necessary ink remaining for initial filling is checked,
LCD panel message: "REMOVE ALL INK CARTRIDGES"
5. Following message is displayed after the lever is released.
LCD panel message: "REMOVE ALL INK CARTRIDGES"
NOTE: The message is indicated until all ink cartridges are removed. LED turns
to ON after corresponded cartridge is removed. LEDs except changing
slot are ON until cartridges are installed.
6. The printer checks available quantity of maintenance tank, after all cartridges are
removed.
NOTE: When 2 cartridges are selected to be changed for procedure (2), it counts
available quantity of maintenance tank for 2 cartridges.
1.
The printer checks CSIC of maintenance tank. When available quantity is
enough, go to step 7. When available quantity is NOT enough, following
messages are displayed every 1 second, and maintenance tank LED blinks
until maintenance tank is replaced with new one.
LCD panel message: "NOT ENOUGH SPACE IN MAINTE TANK"
Operating Panel
"RELEASE INK LEVER"
"RELEASE INK LEVER"
"RELEASE INK LEVER"
"REPLACE WITH NEW MAINTENANCE TANK"
Revision A
64