R Side Cover - Epson Stylus Pro 7600 Service Manual

EPSON Stylus Pro 7600/9600

4.2.2 R Side Cover

1. Remove the Panel Unit. (p.159)
2. Push back the Paper Set Lever to the released
3. Remove two black screws (CBP: M4×10) from the lever handle, and remove the
handle.
4. Using a (-) driver or similar tool, remove the lever blind cap.
Take care not to drop the lever blind cap into the printer.
C H E C K
P O I N T
5. Open the roll paper cover. (See Figure 4-7)
6. Remove the one black screw (CBP: M4×10) from inside the printer.
Adjust the height of the Paper Set Lever by means of the black
screws so that the Paper Set Lever does not come in contact with the
Lever Blind Cap.
Disassembly & Assembly
position.(See Figure 4-6)
Removing the Panel Unit and Housing
Lever Blind Cap
Paper Set Lever
Black screws (CBP: M4×10) ×2
Figure 4-6. R Side Cover Removal 1/5
Roll Paper Cover
Figure 4-7. R Side Cover Removal 2/5
Revision A
Black screws (CBP: M4×10)
160