Epson Stylus Pro 7600 Service Manual page 65

EPSON Stylus Pro 7600/9600
2.
The printer checks CSIC after maintenance tank is replaced. When CSIC
detects that the maintenance tank have enough available quantity, got to step
7. When available quantity is NOT enough, repeat Procedure step 6-1 and step
6-2.
7. Following messages are displayed every 1 second, and #1 slot LED blinks, after
available quantity of maintenance tank is checked.
LCD panel message: "READY FOR DRAINING"
"INSERT DRAINING CARTRIDGE IN #X"
8. The printer starts ejecting ink from corresponded ink tube.
1.
Following message is displayed, and XX slot LED blinks, after draining
cartridge is installed, and CSIC is connected.
LCD panel message: "SET INK LEVER"
2.
The printer checks CSIC after ink lever is set. When the cartridge is correct,
go to step 8-3. When the cartridge is wrong, go to step 8-2-1. When the slot is
wrong, go to step 8-2-2.
1.
When a cartridge except draining cartridge is installed, following
messages are displayed every 1 second, and XX slot LED blinks until the
cartridge is removed. Go back to step 8-1.
LCD panel message: "WRONG CARTRIDGE"
"RELEASE INK LEVER"
2.
When the cartridge is installed in a slot except XX, following messages
are displayed every 1 second, and XX slot LED blinks until the cartridge
is removed. Go back to step 8-1.
LCD panel message: "INSERT CARTRIDGE IN CORRECT SLOT"
"RELEASE INK LEVER"
3.
Ink ejection starts and following message is displayed.
LCD panel message: "DRAINING XXX%" (0%~100%)
4.
Following messages are displayed every 1 second, and XX slot LED blinks,
after corresponded ink tube ejection is completed.
LCD panel message: "REMOVE DRAINING CARTRIDGE"
"RELEASE INK LEVER"
9. Repeat step 8 when 2 cartridges are replaced. Slot [XX] changes to [K2], and LED
shifts to #2.
Product Description
10. Following message is displayed, and all slots LEDs blink, after the draining
cartridge is removed.
LCD panel message: "INSERT ALL INK CARTRIDGES"
NOTE: Ink remaining for initial filling and wrong cartridge are checked as same
as procedure step3
11. Following message is displayed and all slot LEDs blink after all cartridges are
installed, and CSIC is connected.
LCD panel message: "SET INK LEVER"
12. Ink filling starts automatically after all ink installation.
LCD panel message: "INK CHARGING XXX%"
13. Ink filling completed.
The manufacture logo, ink remaining, and printable pages, which are recorded in
replaced ink cartridge CSIC, are displayed.
14. Paper is fed, and cleaning (CL2) is done only for the first printing after ink
replacement.
Operating Panel
Revision A
65