Panel Setup Value Initialization; Nozzle Check Pattern Printing - Epson Stylus Pro 7600 Service Manual

EPSON Stylus Pro 7600/9600

1.4.3.14 Panel Setup Value Initialization

Selecting this mode allows the user to return all the values set on the panel to the
default values.
Initializing items are following;
Setting item
PG setting
Page line
I/F switching
Code page switching
Roll paper margin setting
Paper width detection
Paper skew detection
Job timeout setting
No margin print
Cutter position adjustment
Ink end warning message
Product Description
Table 1-33.
After initialization
STANDARD
ON
AUTO
PC437
T/B 15mm
ON
ON
30 sec
1 cut
(Manufacture setting)
ON

1.4.3.15 Nozzle Check Pattern Printing

Selecting this mode allows the user to print the firmware version, the waste ink
counter, and the nozzle check pattern.
Order of colors from left
Black1, Cyan, Magenta, LightCyan, LightMagenta, Yellow - Black2
Each parameter indicates the following;
<Z>:
<xxxx>:
<I>:
<yyy>:
<aaaaaaa>:
<bbbbbbb>:
<ccccccc>:
<ddddd.d>:
<eeeee.e>:
<fffff.f>:
Versi n : B<Z><xxxx> <I>
Maintenance Tank : <yyy>%
Current Ink C unt : <aaaaaaa>g Prev.Ink C unt :<bbbbbbb>g C - P:<ccccccc>g
Current Paper C unt: <ddddd.d>cm Prev.Paper C unt:<eeeee.e>cm C - P:<fffff.f>cm
Figure 1-11. Nozzle Check Pattern Printing
Operating Panel
N for Stylus Pro 7600, W for Stylus Pro9600
firmware version
D for dye, P for pigment
Maintenance tank available quantity
total ink counter just before print the last nozzle check
pattern (7 figures)
total ink counter just before print the nozzle check pattern
(7 figures)
value of <aaaaaaa>-<bbbbbbb> (7 figures)
total paper counter just before print the last nozzle check
pattern (5.1 figures)
total paper counter just before print the nozzle check pattern
(5.1 figures)
value of <ddddd.d>-<eeeee.e> (5.1 figures)
Revision A
45