Selectype; Outline - Epson Stylus Pro 7600 Service Manual

EPSON Stylus Pro 7600/9600

1.4.3 SelecType

1.4.3.1 Outline

Startup
The SelecType mode is selected by pressing the SelecType button during print
ready, warning, or maintenance call status. The printer is then automatically
incapable of printing.
Operation
1.
The Printer setting menu can be entered by pushing the SelecType button
during menu shift available state (Print ready, no paper). It is shifted to setting
menu select mode, and the setting menu is displayed on the left side of the
LCD upper line.
2. Each setting menu is displayed one after another by pressing Paper Feed ∆∇
buttons in the setting menu select mode. It is shifted to setting item select
menu by pressing the SelecType button. [Setting menu] is displayed on the
upper line, and [Setting item] is displayed on the lower line.
3. The setting menu is displayed one after another by pressing Paper Feed ∆∇
buttons in the setting item select mode. It is shifted to setting value select
mode of the setting item by pressing the SelecType button. [Setting item] is
displayed on the upper line, and [Setting value] is displayed on the lower line.
The '*' represents the current setup value.
4.
Setting value is displayed on the lower line one after another by pressing
Paper Feed ∆∇ buttons in the setting value select mode if the setting value can
be changed. The '*' represents the current setup value.
5.
When the Enter button is pressed in the setting value select mode, the
displayed setting value is entered as the current setting value. If it has a
corresponded operation, it is started. No operation occurs if '*' is already
displayed.
6.
It returns to the setting item select menu by pressing the Paper Source button
in the setting value select mode. It returns to the setting menu select mode by
pressing the Paper Source button in the setting item select menu.
Product Description
Termination
The printer enters the menu shift available status when the Pause button is
•
pressed in the SelecType mode.
The printer enters the menu shift available status when the Paper source
•
button is pushed once in setting menu select mode.
The printer enters the menu shift available status when setting initialization is
•
executed.
The printer enters the print ready status after the nozzle check pattern or the
•
status sheet is printed.
The printer enters the menu shift available status after black ink is replaced.
•
The printer enters the menu shift available status after the cutter is replaced.
•
The printer returns to the menu shift available status when Pause button is
•
pressed in any modes.
NOTE: Under the special condition, it sometimes can not return to the status.
Panel display
Character strings on the second line in the following list are displayed on the
second line of LCD panel. Setup values are displayed on the second line of LCD
panel.
Operating Panel
Revision A
35