Indications On The Panel; Led Indications In Normal Mode - Epson Stylus Pro 7600 Service Manual

EPSON Stylus Pro 7600/9600

1.4.2 Indications on the Panel

1.4.2.1 lED Indications in Normal Mode

Operate
Displayed functions
While processing data, during power OFF sequence
Fatal error
Reset, timer IC reset/NVRAM clear
With power ON and in status other than those above
F/W updating completed
Paper Out
Displayed functions
Out of paper, end of roll
Confusion of roll paper and sheet
Paper set lever is released
Paper is thick for cleaning
Paper jam
Paper cutting error
Paper not straight
Paper check error
Paper (sheet) eject failure
Fatal error
Reset, timer IC reset/NVRAM clear
Maintenance call
F/W updating completed
Pause
Displayed functions
Print ready
Product Description
Table 1-22.
Indicator status
Blink
Blink
On
On
On
Table 1-23.
Indicator status
On
On
On
On
Blink
Blink
Blink
Blink
Blink
Blink
On
On for 100ms at intervals of 5 seconds
On
Table 1-24.
Indicator status
On
Displayed functions
In SelecType mode
During pause
During ink drying time
During ink sequence
Other errors
Fatal error
Reset, timer IC reset/NVRAM clear
Ink end (warning)
F/W updating completed
Ink Out
Displayed functions
Out of corresponded ink
No cartridge for corresponded ink
Wrong cartridge for corresponded ink
Illegal cartridge for corresponded ink
Corresponded ink level low
Fatal error
Reset, timer IC reset/NVRAM clear
F/W updating completed
Maintenance tank
Displayed functions
Maintenance tank full
No maintenance tank
Maintenance tank almost full warning
Fatal error
Reset, timer IC reset / NVRAM clear
F/W updating completed
Operating Panel
Revision A
Table 1-24.
Indicator status
Off
Off
Blink
Blink
Off
Blink
On
Blink
On
Table 1-25.
Indicator status
On
Blink
Blink
On
On
Table 1-26.
Indicator status
On
Blink
Blink
On
On
33