Suction Fans - Epson Stylus Pro 7600 Service Manual

EPSON Stylus Pro 7600/9600

4.4.4 Suction Fans

1. Remove the Paper Guide L2. (p.168)
2. Remove the two screws (CP(W): M4×8) and one screw (CP(W): M4×40) securing the
fan duct, and then remove the fan duct.
3. Disconnect the fan connector and harness.
4. Remove the one screw (CP(W): M4×8) securing the fan, and remove the fan.
NOTE: The number of fans:
Stylus Pro 7600: 2
Stylus Pro 9600: 3
When removing the right-side Suction Fan of Stylus Pro 7600, use a
C H E C K
short Phillips screwdriver to avoid interference with the
P O I N T
Maintenance Tank Holder.
Disassembly & Assembly
Screw (CP(W): M4×8)
Disassembly and Assembly of Paper Feed Mechanism
Figure 4-57. Suction Fan Mounting Position
Screw (CP(W): M4×40)
Fan Fan Duct
Connector
Figure 4-58. Suction Fan Removal
Revision A
Screws (CP(W): M4×8) ×2
189