Cover Sensor Assy - Epson Stylus Pro 7600 Service Manual

EPSON Stylus Pro 7600/9600

4.5.3 Cover Sensor ASSY

1. Remove the L Side Cover. (p.163)
2. Remove the I/H Cover. (p.164)
3. Open the Front Cover.
4. Remove two screws (CPP: M3×8) securing the Ink Tube Cover and remove the cover.
(See Figure 4-63)
5. Disconnect the harness connector of the Cover Sensor ASSY.
6. Pinch the right and left hooks of the Cover Sensor ASSY and remove the Cover Sensor
ASSY.
Make sure that the Cover Switch Holder is so positioned that the
A D J U S T M E N T
R E Q U I R E D Cover Sensor ASSY operates coupled with the opening/closing of
the Front Cover.
Refer to "5.1.4.9 Cover Sensor ASSY Adjustment" (p.216)
Disassembly & Assembly Disassembly and Assembly of Ink Supply Mechanism
Connector
Figure 4-71. Removing the Cover Sensor ASSY
Revision A
Cover Sensor ASSY
197