Flushing Box Assy - Epson Stylus Pro 7600 Service Manual

EPSON Stylus Pro 7600/9600

4.6.6 Flushing Box ASSY

1. Remove the R Side Cover. (p.160)
2. Remove the Paper Guide L2. (p.168)
3. From the printer body, pull off carefully the waste ink tube (thick) which connects the
Flushing Box ASSY to the Maintenance Tank.
4. Remove the one (CUPS: M3×6) screw securing the Flushing Box ASSY.
5. Take out the Flushing Box, while pulling off carefully the waste ink tube (thin) coming
from the Pump ASSY.
6. Remove the Flushing Box ASSY.
After installing the Flushing Box ASSY, make certain by removing
the Paper Guide L2 that the waste ink tube (thick) is set securely on
the tube joint of the Maintenance Cartridge Holder.
Take off the ink tube (thick/thin) carefully so that ink will not spill
C H E C K
from the ink tube.
P O I N T
Disassembly & Assembly
Waste ink tube
Disassembly and Assembly of Cleaning Mechanism
Waste ink tube (thin)
Screw (CUPS: M3×6)
Figure 4-79. Removing the Flushing Box ASSY
Revision A
Flushing Box ASSY
Waste ink tube (thick)
204