Lubrication And Glue; Lubricating The Cr Guide Rail - Epson Stylus Pro 7600 Service Manual

EPSON Stylus Pro 7600/9600

6.2 Lubrication and Glue

In this printer, as necessary, the lubricants specified below should be used for oiling
and adhesion during disassembly and assembly operations.
Table 6-3. Grease and Glue Application
Type Name Amount
Super-Multi Oil
n/a
#32
Grease
G-26
40g
(Molicoat EM- (Dow Corning
(n/a)
60L)
Glue Screw lock 1,000g
Do not apply any other oils, lubricants, or glues than those
C A U T I O N
described in this manual; otherwise printer parts may be damaged
or their useful life may be shortened.
Maintenance
Company Part # Location
Idemitsu n/a Carriage rail bearings
EPSON
B702600001 Other parts on mechanism
Asia)
EPSON B730200200 Screw lock (blue)

6.2.1 Lubricating the CR Guide Rail

Lubricant: Super-Multi Oil #32 (Idemitsu)
Apply lubricant to the four points as shown below on the CR Guide Rail (carriage
roller running surface).
Before applying lubricant, clean the surface.
C H E C K
P O I N T
Figure 6-1. Lubricating Positions on the CR Guide Rail
Lubrication and Glue
Revision A
CR Guide Rail
280