Pump Assy - Epson Stylus Pro 7600 Service Manual

EPSON Stylus Pro 7600/9600

4.6.4 Pump ASSY

1. Remove the Maintenance ASSY.
2. Remove the one central screw (M3×4) of the Pump ASSY and remove the three parts
including the gear. (See Figure 4-76)
3. Remove the two screws (M3×6) on the gear side.
4. Disconnect the tube from the Cap ASSY, remove the one screw (M 3×6) and remove
the Pump ASSY.(See Figure 4-77)
Once you have replaced the Pump ASSY, execute "CLEAR
A D J U S T M E N T
R E Q U I R E D
COUNTERS" (See p.71).
Disassembly & Assembly
(See p.199)
Disassembly and Assembly of Cleaning Mechanism
Gear (3 parts)
Figure 4-76. Removing the Pump ASSY 1/2
Pump ASSY
Screw (M3×6)
Figure 4-77. Removing the Pump ASSY 2/2
Revision A
Screw (M3×4)
Screws (M3×6) ×2
Ink tube
201