Mechanism Specifications; Printable Area - Epson Stylus Pro 7600 Service Manual

EPSON Stylus Pro 7600/9600

1.2.6 Mechanism Specifications

1.2.6.1 Printable Area

Table 1-15. Printable Area
Roll paper
Item
/Sheet
PW Roll paper Stylus Pro 7600
(Paper width)
Stylus Pro 9600
Sheet Stylus Pro 7600
Stylus Pro 9600
PL Roll paper Stylus Pro 7600/Stylus Pro 9600
(Paper length)
Sheet Stylus Pro 7600/Stylus Pro 9600
TM Roll paper Stylus Pro 7600/Stylus Pro 9600
(Top margin)
Sheet Stylus Pro 7600/Stylus Pro 9600
BM Roll paper Stylus Pro 7600/Stylus Pro 9600
(Bottom margin)
Sheet Stylus Pro 7600/Stylus Pro 9600
LM Roll paper Stylus Pro 7600/Stylus Pro 9600
(Left margin)
Sheet Stylus Pro 7600/Stylus Pro 9600
RM Roll paper Stylus Pro 7600/Stylus Pro 9600
(Right margin)
Sheet Stylus Pro 7600/Stylus Pro 9600
The printer detects paper width when paper is set. (If paper width detection setting
is OFF, it does not detect paper width.)
It does not print the image beyond the detected paper width or the printable area
specified by paper size setting.
(It may print on the platen if paper width detection setting is OFF.)
Margins of roll paper can be changed on the panel as follows;
Top/bottom 15 mm, left/right 3 mm
Top/bottom/left/right 3 mm
Top/bottom/left/right 15 mm
NOTE: Under special conditions, it is possible to set right and left margin (LM,
RM) to 0.
Product Description
Model Dimension
203 mm ~ 610 mm
203 mm ~ 1118 mm
203 mm ~ 610 mm
203 mm ~ 1118 mm
Max. 202m
279 mm ~ 1580 mm
3 mm/15 mm
3 mm
3 mm/15 mm
14 mm
0 mm/3 mm/15 mm
0 mm/3 mm
0 mm/3 mm/15 mm
0 mm/3 mm
For borderless print, right and left margins are 3mm each because skew detection
limit is 3mm. If the distance from the paper edge to the platen (sponge width) is
less than 3mm, the maximum surplus print quantity without ink discharge onto the
platen (0mm~3mm) is printable area.
Basic Specifications
Printable Area
Figure 1-1. Printable Area
Revision A
21