Pg Setting - Epson Stylus Pro 7600 Service Manual

EPSON Stylus Pro 7600/9600

1.4.3.3 PG Setting

Selecting this mode allows the user to set the platen gap. The relationship between
panel setting, command setting (SN command), and actual platen gap position is shown
below.
Table 1-29. PG Setting Values
Paper thickness PH
sensor command
Less than 0.3mm 00H Narrow
Standard
Wide
Wider
01H-06H Narrow
Standard
Wide
Wider
07H-12H
Product Description
Actual PG
Panel SN command
position
- Minimum
Minimum
Small
Middle
Minimum Minimum
Small Minimum
Middle Small
Big Middle
Minimum Minimum
Small Small
Middle Middle
Big Big
Minimum Small
Small Middle
Middle Big
Big Big
Minimum Middle
Small Big
Middle Big
Big Big
- - Big
Table 1-29. PG Setting Values (continued)
Paper thickness
sensor command
More than 0.3mm 00H-06H
Less than 0.7mm
Note
*1
*1
07H-12H
More than 0.7mm
Note 1: Only in this case, SN command is ignored. When paper thickness is 0.15mm, it is
operated with minimum Bi-D value and minimum SN(PG).
2: When "Wide" or "Wider" is set, "W" is displayed on the left side of LCD lower line.
3: When "Narrow" is set, "N" is displayed on the left side of LCD lower line.
Operating Panel
PH
Panel SN command
Narrow Minimum
Small
Middle
Big
Standard Minimum
Small
Middle
Big
Wide Minimum
Small
Middle
Big
Wider Minimum
Small
Middle
Big
- -
- - -
Revision A
Actual PG
Note
position
Small
Small
Small
Middle
Small
Small
Middle
Big
Small
Middle
Big
Big
Middle
Big
Big
Big
Big
Big
40