Installing A Memory Module - IBM System x3550 M4 Installation And Service Manual

Figure 34. DVD drive cable routing
Results
If you have other devices to install or remove, do so now. Otherwise, go to
"Completing the installation" on page 96.

Installing a memory module

The following notes describe the types of DIMMs that the server supports and
other information that you must consider when you install DIMMs.
v When you install or remove DIMMs, the server configuration information
v The server supports only industry-standard double-data-rate 3 (DDR3), 1066,
changes. When you restart the server, the system displays a message that
indicates that the memory configuration has changed.
1333, 1600, or 1866 MHz, PC3-8500, PC3-10600, PC3-12800, or PC3-14900
registered or unbuffered, synchronous dynamic random-access memory
(SDRAM) dual inline memory modules (DIMMs) with error correcting code
(ECC). See http://www.ibm.com/systems/info/x86servers/serverproven/
compat/us/ for a list of supported memory modules for the server.
– The specifications of a DDR3 DIMM are on a label on the DIMM, in the
following format.
ggggg eRxff PC3v-wwwwwm-aa-bb-ccd
where:
Chapter 2. Installing optional devices
49