IBM System x3550 M4 Installation And Service Manual page 599

816f0028-2101xxxx Sensor [SensorElementName] has returned to normal on management system
[ComputerSystemElementName]. (TPM Cmd Failures)
Explanation: This message is for the use case when an implementation has detected a Sensor returned from
degraded/unavailable/failure.
May also be shown as 816f00282101xxxx or 0x816f00282101xxxx
Severity: Info
Alert Category: Warning - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0399
SNMP Trap ID: 60
Automatically notify Support: No
User response: No action; information only.
816f0107-0301xxxx An Over-Temperature Condition has been removed on [ProcessorElementName]. (CPU 1)
Explanation: This message is for the use case when an implementation has detected a Over-Temperature Condition
has been Removed for Processor.
May also be shown as 816f01070301xxxx or 0x816f01070301xxxx
Severity: Info
Alert Category: Critical - Temperature
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0037
SNMP Trap ID: 0
Automatically notify Support: No
User response: No action; information only.
816f0107-0302xxxx An Over-Temperature Condition has been removed on [ProcessorElementName]. (CPU 2)
Explanation: This message is for the use case when an implementation has detected a Over-Temperature Condition
has been Removed for Processor.
May also be shown as 816f01070302xxxx or 0x816f01070302xxxx
Severity: Info
Alert Category: Critical - Temperature
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0037
SNMP Trap ID: 0
Automatically notify Support: No
User response: No action; information only.
816f0028-2101xxxx • 816f0107-0302xxxx
Appendix A. Integrated management module II (IMM2) error messages
581