IBM System x3550 M4 Installation And Service Manual page 541

806f070d-0407xxxx Rebuild in progress for Array in system [ComputerSystemElementName]. (Drive 7)
Explanation: This message is for the use case when an implementation has detected that an Array Rebuild is in
Progress.
May also be shown as 806f070d0407xxxx or 0x806f070d0407xxxx
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0178
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only.
806f072b-2201xxxx A successful software or firmware change was detected on system
[ComputerSystemElementName]. (Bkup Auto Update)
Explanation: This message is for the use case when an implementation has detected a Successful Software or
Firmware Change.
May also be shown as 806f072b2201xxxx or 0x806f072b2201xxxx
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0450
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only. ROM Recovery :
806f0807-0301xxxx [ProcessorElementName] has been Disabled. (CPU 1)
Explanation: This message is for the use case when an implementation has detected a Processor has been Disabled.
May also be shown as 806f08070301xxxx or 0x806f08070301xxxx
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0061
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only.
806f070d-0407xxxx • 806f0807-0301xxxx
Appendix A. Integrated management module II (IMM2) error messages
523