Removing The Air Baffle - IBM System x3550 M4 Installation And Service Manual

Removing the air baffle

Use this information to remove the air baffle.
About this task
To remove the air baffle, complete the following steps:
Procedure
1. Read the safety information that begins on "Safety" on page vii and
2. Turn off the server and peripheral devices and disconnect the power cords and
3. Remove the cover (see "Removing the cover" on page 36).
4. Grasp the air baffle, disengage pins from pin holes; then, lift the air baffle up.
Figure 108. Air baffle removal
5. Remove the air baffle from the server and set it aside.
210
IBM System x3550 M4 Type 7914: Installation and Service Guide
"Installation guidelines" on page 33.
all external cables (see "Turning off the server" on page 23).
Attention: For proper cooling and airflow, replace the air baffle before you
turn on the server. Operating the server with the air baffle removed might
damage server components.