IBM System x3550 M4 Installation And Service Manual page 469

806f010f-2201xxxx The System [ComputerSystemElementName] encountered a firmware hang. (Firmware Error)
Explanation: This message is for the use case when an implementation has detected a System Firmware Hang.
May also be shown as 806f010f2201xxxx or 0x806f010f2201xxxx
Severity: Error
Alert Category: System - Boot failure
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0186
SNMP Trap ID: 25
Automatically notify Support: No
User response:
1. Make sure the server meets the minimum configuration to start (see Power-supply LEDs).
2. Update the server firmware on the primary page. Important: Some cluster solutions require specific code levels
or coordinated code updates. If the device is part of a cluster solution, verify that the latest level of code is
supported for the cluster solution before you update the code.
3. (Trained technician only) Replace the system board.
806f0113-0301xxxx A bus timeout has occurred on system [ComputerSystemElementName]. (CPU 1 PECI)
Explanation: This message is for the use case when an implementation has detected a Bus Timeout.
May also be shown as 806f01130301xxxx or 0x806f01130301xxxx
Severity: Error
Alert Category: Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0224
SNMP Trap ID: 50
Automatically notify Support: No
User response:
1. Reseat the microprocessor, and then restart the server.
2. Replace microprocessor n. (n = microprocessor number)
806f0113-0302xxxx A bus timeout has occurred on system [ComputerSystemElementName]. (CPU 2 PECI)
Explanation: This message is for the use case when an implementation has detected a Bus Timeout.
May also be shown as 806f01130302xxxx or 0x806f01130302xxxx
Severity: Error
Alert Category: Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0224
SNMP Trap ID: 50
Automatically notify Support: No
User response:
Reseat the microprocessor, and then restart the server.
1.
Replace microprocessor n. (n = microprocessor number)
2.
806f010f-2201xxxx • 806f0113-0302xxxx
Appendix A. Integrated management module II (IMM2) error messages
451