IBM System x3550 M4 Installation And Service Manual page 745

201-824-002 Standalone Memory Test Aborted
Explanation: Node Interleave feature must be OFF. Go to Setup and disable Node Interleave option and then re-run
the test.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and try the test after each action.
2. If the problem remains, contact your technical-service representative.
3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
4. Make sure that DSA and BIOS/uEFI are at the latest level.
201-824-003 Standalone Memory Test Aborted
Explanation: Node Interleave feature must be OFF. Go to Setup and disable Node Interleave option and then re-run
the test.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and try the test after each action.
2. If the problem remains, contact your technical-service representative.
3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
4. Make sure that DSA and BIOS/uEFI are at the latest level.
201-826-000 Standalone Memory Test Aborted
Explanation: BIOS: Memory Controller has been disabled. Go to Setup and Enable Memory Controller.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and try the test after each action.
2. If the problem remains, contact your technical-service representative.
3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s). Reconnect it to power.
4. Make sure that DSA and BIOS/uEFI are at the latest level.
201-824-002 • 201-826-000
Appendix C. DSA diagnostic test results
727