IBM System x3550 M4 Installation And Service Manual page 609

816f010d-0400xxxx The Drive [StorageVolumeElementName] has been enabled. (Drive 0)
Explanation: This message is for the use case when an implementation has detected a Drive was Enabled.
May also be shown as 816f010d0400xxxx or 0x816f010d0400xxxx
Severity: Info
Alert Category: Critical - Hard Disk drive
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0167
SNMP Trap ID: 5
Automatically notify Support: No
User response: No action; information only.
816f010d-0401xxxx The Drive [StorageVolumeElementName] has been enabled. (Drive 1)
Explanation: This message is for the use case when an implementation has detected a Drive was Enabled.
May also be shown as 816f010d0401xxxx or 0x816f010d0401xxxx
Severity: Info
Alert Category: Critical - Hard Disk drive
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0167
SNMP Trap ID: 5
Automatically notify Support: No
User response: No action; information only.
816f010d-0402xxxx The Drive [StorageVolumeElementName] has been enabled. (Drive 2)
Explanation: This message is for the use case when an implementation has detected a Drive was Enabled.
May also be shown as 816f010d0402xxxx or 0x816f010d0402xxxx
Severity: Info
Alert Category: Critical - Hard Disk drive
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0167
SNMP Trap ID: 5
Automatically notify Support: No
User response: No action; information only.
816f010d-0400xxxx • 816f010d-0402xxxx
Appendix A. Integrated management module II (IMM2) error messages
591