IBM System x3550 M4 Installation And Service Manual page 542

806f0807-0302xxxx • 806f0813-2581xxxx
806f0807-0302xxxx [ProcessorElementName] has been Disabled. (CPU 2)
Explanation: This message is for the use case when an implementation has detected a Processor has been Disabled.
May also be shown as 806f08070302xxxx or 0x806f08070302xxxx
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0061
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only.
806f0807-2584xxxx [ProcessorElementName] has been Disabled. (All CPUs)
Explanation: This message is for the use case when an implementation has detected a Processor has been Disabled.
May also be shown as 806f08072584xxxx or 0x806f08072584xxxx
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0061
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only. One of the CPUs :
806f0813-2581xxxx A Uncorrectable Bus Error has occurred on system [ComputerSystemElementName]. (DIMMs)
Explanation: This message is for the use case when an implementation has detected a Bus Uncorrectable Error.
May also be shown as 806f08132581xxxx or 0x806f08132581xxxx
Severity: Error
Alert Category: Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0240
SNMP Trap ID: 50
Automatically notify Support: Yes
User response:
1. Check the system-event log.
2. (Trained technician only) Remove the failing microprocessor from the system board (see Removing a
microprocessor and heat sink).
3. Check for a server firmware update. Important: Some cluster solutions require specific code levels or coordinated
code updates. If the device is part of a cluster solution, verify that the latest level of code is supported for the
cluster solution before you update the code.
4. Make sure that the two microprocessors are matching.
5. (Trained technician only) Replace the system board.
524
IBM System x3550 M4 Type 7914: Installation and Service Guide