IBM System x3550 M4 Installation And Service Manual page 477

806f020d-0407xxxx Failure Predicted on drive [StorageVolumeElementName] for array
[ComputerSystemElementName]. (Drive 7)
Explanation: This message is for the use case when an implementation has detected an Array Failure is Predicted.
May also be shown as 806f020d0407xxxx or 0x806f020d0407xxxx
Severity: Warning
Alert Category: System - Predicted Failure
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0168
SNMP Trap ID: 27
Automatically notify Support: Yes
User response:
1. Run the hard disk drive diagnostic test on drive n.
2. Reseat the following components: a. Hard disk drive b. Cable from the system board to the backplane.
3. Replace the following components one at a time, in the order shown, restarting the server each time: a. Hard
disk drive. b. Cable from the system board to the backplane. c. Hard disk drive backplane. (n = hard disk drive
number)
806f0223-2101xxxx Powering off system [ComputerSystemElementName] initiated by [WatchdogElementName].
(IPMI Watchdog)
Explanation: This message is for the use case when an implementation has detected a Poweroff by Watchdog has
occurred.
May also be shown as 806f02232101xxxx or 0x806f02232101xxxx
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0372
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only.
806f0308-0a01xxxx [PowerSupplyElementName] has lost input. (Power Supply 1)
Explanation: This message is for the use case when an implementation has detected a Power Supply that has input
that has been lost.
May also be shown as 806f03080a01xxxx or 0x806f03080a01xxxx
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0100
SNMP Trap ID:
Automatically notify Support: No
User response:
1. Reconnect the power cords.
2. Check power supply n LED.
806f020d-0407xxxx • 806f0308-0a01xxxx
Appendix A. Integrated management module II (IMM2) error messages
459