IBM System x3550 M4 Installation And Service Manual page 627

Type 7914
Hide thumbs Also See for System x3550 M4:
Table of Contents

Advertisement

816f0313-1701xxxx
System [ComputerSystemElementName] has recovered from an NMI. (NMI State)
Explanation: This message is for the use case when an implementation has detected a Software NMI has been
Recovered from.
May also be shown as 816f03131701xxxx or 0x816f03131701xxxx
Severity: Info
Alert Category: Critical - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0230
SNMP Trap ID: 50
Automatically notify Support: No
User response: No action; information only.
816f040c-2001xxxx
[PhysicalMemoryElementName] Enabled on Subsystem [MemoryElementName]. (DIMM 1)
Explanation: This message is for the use case when an implementation has detected that Memory has been Enabled.
May also be shown as 816f040c2001xxxx or 0x816f040c2001xxxx
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0130
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only.
816f040c-2002xxxx
[PhysicalMemoryElementName] Enabled on Subsystem [MemoryElementName]. (DIMM 2)
Explanation: This message is for the use case when an implementation has detected that Memory has been Enabled.
May also be shown as 816f040c2002xxxx or 0x816f040c2002xxxx
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0130
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only.
816f0313-1701xxxx • 816f040c-2002xxxx
Appendix A. Integrated management module II (IMM2) error messages
609

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents