IBM System x3550 M4 Installation And Service Manual page 417

80010b01-1401xxxx Numeric sensor [NumericSensorElementName] going high (upper non-recoverable) has
asserted. (CPU1 VR Temp)
Explanation: This message is for the use case when an implementation has detected an Upper Non-recoverable
sensor going high has asserted.
May also be shown as 80010b011401xxxx or 0x80010b011401xxxx
Severity: Error
Alert Category: Critical - Temperature
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0498
SNMP Trap ID: 0
Automatically notify Support: No
User response: Check the server airflow. Make sure that nothing is blocking the air from coming into or preventing
the air from exiting the server.
80010b01-1402xxxx Numeric sensor [NumericSensorElementName] going high (upper non-recoverable) has
asserted. (CPU2 VR Temp)
Explanation: This message is for the use case when an implementation has detected an Upper Non-recoverable
sensor going high has asserted.
May also be shown as 80010b011402xxxx or 0x80010b011402xxxx
Severity: Error
Alert Category: Critical - Temperature
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0498
SNMP Trap ID: 0
Automatically notify Support: No
User response: Check the server airflow. Make sure that nothing is blocking the air from coming into or preventing
the air from exiting the server.
80010b01-1403xxxx Numeric sensor [NumericSensorElementName] going high (upper non-recoverable) has
asserted. (DIMM AB VR Temp)
Explanation: This message is for the use case when an implementation has detected an Upper Non-recoverable
sensor going high has asserted.
May also be shown as 80010b011403xxxx or 0x80010b011403xxxx
Severity: Error
Alert Category: Critical - Temperature
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0498
SNMP Trap ID: 0
Automatically notify Support: No
User response: Check the server airflow. Make sure that nothing is blocking the air from coming into or preventing
the air from exiting the server.
80010b01-1401xxxx • 80010b01-1403xxxx
Appendix A. Integrated management module II (IMM2) error messages
399