Removing The Front Video Connector Assembly - IBM System x3550 M4 Installation And Service Manual

Removing the front video connector assembly

Use this information to remove the front video connector assembly.
About this task
To remove the front video connector assembly, complete the following steps:
Procedure
1. Read the safety information that begins on "Safety" on page vii and
2. Turn off the server and peripheral devices and disconnect the power cords and
3. Disconnect the cables from the front video connector.
Figure 204. Front USB and video cables connection
4. Remove the screws from the video connector assembly.
304
IBM System x3550 M4 Type 7914: Installation and Service Guide
"Installation guidelines" on page 33.
all external cables, if necessary.