IBM System x3550 M4 Installation And Service Manual page 431

8008010f-2101xxxx • 800b0008-1301xxxx
8008010f-2101xxxx Device [LogicalDeviceElementName] has been added. (Phy Presence Jmp)
Explanation: This message is for the use case when an implementation has detected a Device was inserted.
May also be shown as 8008010f2101xxxx or 0x8008010f2101xxxx
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0536
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only.
80080128-2101xxxx Device [LogicalDeviceElementName] has been added. (Low Security Jmp)
Explanation: This message is for the use case when an implementation has detected a Device was inserted.
May also be shown as 800801282101xxxx or 0x800801282101xxxx
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0536
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only.
800b0008-1301xxxx Redundancy [RedundancySetElementName] has been restored. (Power Unit)
Explanation: This message is for the use case when an implementation has detected Redundancy was Restored.
May also be shown as 800b00081301xxxx or 0x800b00081301xxxx
Severity: Info
Alert Category: Warning - Redundant Power Supply
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0561
SNMP Trap ID: 10
Automatically notify Support: No
User response: No action; information only.
413
Appendix A. Integrated management module II (IMM2) error messages