Re-Installing The Tpm; Concluding Steps - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

14.3.3.4 Re-installing the TPM

Figure 303: TPM spacer
Ê The TPM spacer is already present on the system board.
Ê Re-install the TPM board as described in section
on page 468.

14.3.3.5 Concluding steps

Perform the following procedures:
"Installing the air duct" on page 74
Ê
"Mounting the server cover" on page
Ê
"Sliding the server into the rack" on page 80
Ê
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page
"Connecting the server to the power source" on page 81
Ê
RX300 S7
Upgrade and Maintenance Manual
System board and components
"Installing the TPM board"
76.
77.
481