Removing The Front Panel Module; Preparing The Front Panel Module - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

13.3.1.3 Removing the front panel module

"Removing the front panel module" on page 410
Ê
Ê If applicable remove the front VGA connetor see section
VGA connector" on page

13.3.1.4 Preparing the front panel module

Figure 260: Breaking out the front LAN cover plate
Ê Break out the LAN cover plate on the front panel cover.
I
Please note that once removed, the front LAN cover plate cannot be
refitted.
RX300 S7
421.
Upgrade and Maintenance Manual
Front panel
"Removing the front
427