Extending The Server Out Of The Rack - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

4.5.2

Extending the server out of the rack

Figure 11: Extending the server out of the rack
Ê Shut down the server and remove external cables as described in section
"Preliminary steps" on page
Ê If you are not using a cable mounting arm (CMA kit), ensure that the rear
cables are long enough not to be strained or damaged when extending the
server out of the rack.
Ê Fold down the two quick release levers on the rack mounting frame (1) and
pull the server out of the rack until it locks in place (2).
V
CAUTION!
Do not use the extended server as a surface on which to put things or as
a work surface, and strictly avoid leaning on or against it.
RX300 S7
68.
Upgrade and Maintenance Manual
Basic hardware procedures
69