Removing A Memory Module; Installing A Memory Module; Concluding Steps - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

Main memory

10.4.3 Removing a memory module

Ê Identify the defective memory slot using the server management software.
Ê Remove the defective memory module as described in section
memory modules" on page

10.4.4 Installing a memory module

Ê Replace the defective memory module as described in section
memory modules" on page

10.4.5 Concluding steps

Perform the following procedures:
"Installing the air duct" on page 74
Ê
"Mounting the server cover" on page 76
Ê
"Sliding the server into the rack" on page 80
Ê
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page
"Connecting the server to the power source" on page 81
Ê
"Updating or recovering the system board BIOS and iRMC" on page 92
Ê
"Enabling SVOM boot watchdog functionality" on page 101
Ê
"Enabling replaced components in the system BIOS" on page 101
Ê
"Verifying the memory mode" on page 102
Ê
"Enabling BitLocker functionality" on page 107
Ê
288
284.
280.
Upgrade and Maintenance Manual
77.
"Removing
"Installing
RX300 S7