Removing Memory Modules; Required Tools; Preliminary Steps; Removing A Memory Module - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

Main memory
10.3

Removing memory modules

Upgrade and Repair Units (URU)
Average task duration: 5 minutes

10.3.1 Required tools

Preliminary and concluding steps: tool-less
●
Removing memory modules: tool-less
●

10.3.2 Preliminary steps

Perform the following procedures:
"Disabling BitLocker functionality" on page 85
Ê
"Disabling SVOM boot watchdog functionality" on page 86
Ê
"Locating the defective server" on page 56
Ê
"Shutting down the server" on page 65
Ê
"Disconnecting power cords" on page 66
Ê
"Extending the server out of the rack" on page 69
Ê
If further required, remove the server from the rack as described in section
"Removing the server from the rack" on page
"Removing the server cover" on page 72
Ê
"Removing the air duct" on page 73
Ê

10.3.3 Removing a memory module

Ê Identify the desired memory slot according to the mounting order described
in section "Memory sequence" on page
284 Upgrade and Maintenance Manual
70.
272.
RX300 S7