Opening The Server; Removing The Server Cover - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

Basic hardware procedures
4.6

Opening the server

V
CAUTION!
Before removing or installing covers, turn off the server and all
●
peripheral devices. Also unplug all power cables from the outlet.
Failure to do so can cause electric shock.
In order to comply with applicable EMC regulations (regulations on
●
electromagnetic compatibility) and satisfy cooling requirements, the
PRIMERGY RX300 S7 server must not run while the server cover is
removed.
For further safety information, please refer to chapter
●
information" on page
4.6.1

Removing the server cover

Figure 13: Removing the server cover
Ê Open the locking lever. This will slide the top cover back disengaging the
locking mechanism.
72
43.
Upgrade and Maintenance Manual
"Important
RX300 S7