Removing The Front Vga Connector; Re-Installing The Front Panel Module; Concluding Steps - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

13.2.2.4 Removing the front VGA connector

Figure 259: Removing front VGA connector from the front panel module
Ê Remove two screws.
Ê Push the VGA connector out of the front panel module.

13.2.2.5 Re-installing the front panel module

"Installing the front panel module" on page 413
Ê

13.2.2.6 Concluding steps

Perform the following procedures:
"Installing the fan box" on page 184
Ê
"Installing the air duct" on page 74
Ê
"Mounting the server cover" on page 76
Ê
RX300 S7
Upgrade and Maintenance Manual
Front panel
423