System board and components
14.5.2 Preliminary steps
Perform the following procedures:
Ê Ensure to note down your current network settings in the operating system.
For further information, please refer to section
recovery" on page
"Disabling BitLocker functionality" on page 85
Ê
"Disabling SVOM boot watchdog functionality" on page 86
Ê
"Opening the rack door" on page 64
Ê
"Locating the defective server" on page 56
Ê
"Shutting down the server" on page 65
Ê
"Disconnecting power cords" on page 66
Ê
Ê Disconnect all external cables.
"Extending the server out of the rack" on page 69
Ê
If further required, remove the server from the rack as described in section
"Removing the server from the rack" on page
"Removing the server cover" on page 72
Ê
"Removing the air duct" on page 73
Ê
490
489.
Upgrade and Maintenance Manual
"Note on network settings
70.
RX300 S7