Removing The Front Panel Module; Removing The Front Vga Connector; Installing The New Front Vga Connector; Re-Installing The Front Panel Module - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

"Removing the server cover" on page 72
Ê
"Removing the air duct" on page 73
Ê
"Removing the fan box" on page 183
Ê

13.2.3.3 Removing the front panel module

"Removing the front panel module" on page 418
Ê

13.2.3.4 Removing the front VGA connector

"Removing the front VGA connector" on page
Ê

13.2.3.5 Installing the new front VGA connector

Ê Install the new front VGA connector as described in section
front VGA connector" on page

13.2.3.6 Re-installing the front panel module

"Installing the front panel module" on page
Ê

13.2.3.7 Concluding steps

Perform the following procedures:
"Installing the fan box" on page 184
Ê
"Installing the air duct" on page 74
Ê
"Mounting the server cover" on page 76
Ê
"Sliding the server into the rack" on page 80
Ê
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page
"Connecting the server to the power source" on page 81
Ê
"Closing the rack door" on page 84
Ê
"Enabling BitLocker functionality" on page 107
Ê
RX300 S7
419.
Upgrade and Maintenance Manual
423.
413.
77.
Front panel
"Installing the
425