Basic hardware procedures
4.1.1
Locating the defective server
Figure 2: Identification button and indicator on front panel
Figure 3: Identification indicator on connector panel
When working in a datacenter environment, switch on the ID indicator on the
front and rear connector panels of the server for easy identification.
Ê Press the ID button on the front panel (2) or use the ServerView Operations
Manager user interface to switch on the system identification LEDs (1).
I
For further information, refer to the "ServerView Suite Local Service
Concept (LSC)" manual available online at
(EMEA market) or
(Japanese market).
56
http://jp.fujitsu.com/platform/server/primergy/manual/
Upgrade and Maintenance Manual
http://manuals.ts.fujitsu.com
RX300 S7