Installing An Expansion Card - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

V
CAUTION!
Keep the slot bracket for further use.
Always replace slot brackets into unused PCI slot openings to comply
with applicable EMC regulations and satisfy cooling requirements.
9.2.1.4

Installing an expansion card

Ê Remove the expansion card from its protective packaging.
I
For further instructions regarding controller settings, please refer to
the accompanying documentation.
Ê If applicable, attach the required slot bracket to the expansion card as
described in section
Figure 83: Installing the expansion card (A)
Ê Carefully insert the expansion card into the desired PCI slot and press down
firmly until it is fully seated in the slot.
RX300 S7
"Mounting expansion card slot brackets" on page
Upgrade and Maintenance Manual
Expansion cards and backup units
254.
193