Figure 288: Installing the UFM board
Ê Connect the UFM board to the system board, snapping in the UFM spacer.
14.2.1.4 Concluding steps
Perform the following procedures:
"Installing the air duct" on page 74
Ê
"Mounting the server cover" on page 76
Ê
"Sliding the server into the rack" on page 80
Ê
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page
"Connecting the server to the power source" on page 81
Ê
"Closing the rack door" on page 84
Ê
"Enabling SVOM boot watchdog functionality" on page 101
Ê
"Enabling BitLocker functionality" on page 107
Ê
RX300 S7
Upgrade and Maintenance Manual
System board and components
77.
459