Removing Pci Slot Bracket; Installing The Modular Lan Controller - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

Ê Connect the NCSI sideband cable to the Modular LAN controller:
Connector
20-pin (black)
I
For a complete cabling overview, please refer to section
overview" on page
9.4.1.4

Removing PCI slot bracket

"Removing PCI slot bracket" on page 192
Ê
9.4.1.5

Installing the Modular LAN controller

Ê Remove the Modular LAN controller from its protective packaging.
I
For further instructions regarding controller settings, please refer to
the accompanying documentation.
"Preparing the Modular LAN controller" on page
Ê
Figure 94: Installing the Modular LAN controller
RX300 S7
Cable
NCSI sideband cable T26139-Y4015-V101
525.
Upgrade and Maintenance Manual
Expansion cards and backup units
215.
"Cables
217