Basic Procedures; Required Tools; Preliminary Steps; Removing The - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

15.2

Basic Procedures

15.2.1 Required tools

Preliminary and concluding steps: tool-less
●
Converting the server model:
●
– Phillips PH2 / (+) No. 2 screw driver
– Slotted screw driver

15.2.2 Preliminary steps

Perform the following procedures:
"Opening the rack door" on page 64
Ê
"Disabling BitLocker functionality" on page
Ê
"Extending the server out of the rack" on page 69
Ê
If further required, remove the server from the rack as described in section
"Removing the server from the rack" on page
"Shutting down the server" on page 65
Ê
"Disconnecting power cords" on page 66
Ê
Ê Remove all external cables.
"Removing the server cover" on page
Ê
"Removing the air duct" on page 73
Ê
"Removing the fan box" on page 183
Ê
15.2.3 Removing the front cover
I
The Removing of the front cover for all versions is to proceed in the same
way.
RX300 S7
Upgrade and Maintenance Manual
Conversion configurations
85.
70.
72.
501