Concluding Steps - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

Front panel
Ê Connect the front LAN cable to the front LAN board.
Figure 271: Connecting front panel cables
Ê Connect the front panel cable to the system board connector FRONT
PANEL.
Ê Connect the front LAN board to system board connector FRONT LAN.
I
Ensure that the front LAN board holder snaps in place.

13.3.1.7 Concluding steps

Perform the following procedures:
"Installing the fan box" on page 184
Ê
"Installing the air duct" on page 74
Ê
"Mounting the server cover" on page 76
Ê
"Sliding the server into the rack" on page 80
Ê
434 Upgrade and Maintenance Manual
RX300 S7