Closing The Server; Mounting The Server Cover - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

Basic hardware procedures
4.7

Closing the server

V
CAUTION!
Before attaching the covers, make sure no unnecessary parts or tools
●
are left inside the server.
In order to comply with applicable EMC regulations (regulations on
●
electromagnetic compatibility) and satisfy cooling requirements, the
PRIMERGY RX300 S7 server must not run while the server cover is
removed.
For further safety information, please refer to chapter
●
information" on page
4.7.1

Mounting the server cover

Figure 18: Mounting the server cover
Ê Open the locking lever on the top cover.
Ê Fit the server cover on the chassis, aligning it according to the edge guide
marking on the upper server surface.
Ê Lower the server cover onto the chassis.
76
43.
Upgrade and Maintenance Manual
"Important
RX300 S7