System board and components
Ê Fit the new UFM board on the UFM connector and the remaining UFM
spacer (1).
Ê Secure the UFM board to the UFM spacer with the nylon screw (2).
Destroying the defective UFM board
V
CAUTION!
The UFM board contains customer information (e.g. IP address, license
numbers). After replacing the UFM, hand the defective UFM board over
to the customer. If the customer requests disposal of the defective UFM
board, proceed as follows:
Figure 294: Destroying the defective UFM board
Ê Use a pair of combination pliers (1) and flat nose pliers (2) to break
the UFM board in half as shown.
466
Upgrade and Maintenance Manual
RX300 S7