Concluding Steps - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

Front panel
Ê Carefully insert the mounting bracket.Do not damage the ESD contact
springs of the mounting bracket.
Figure 279: Installing the screws
Ê Fasten the mounting bracket with the two screws.
"Installing the front panel module" on page 413
Ê

13.3.2.5 Concluding steps

Perform the following procedures:
"Installing the fan box" on page 184
Ê
"Installing the air duct" on page 74
Ê
"Mounting the server cover" on page 76
Ê
"Sliding the server into the rack" on page 80
Ê
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page
"Connecting the server to the power source" on page 81
Ê
442 Upgrade and Maintenance Manual
77.
RX300 S7