Removing The Defective Lsd Module; Installing The New Lsd Module; Concluding Steps - Fujitsu PRIMERGY RX300 S7 Upgrade And Maintenance Manual

"Shutting down the server" on page 65
Ê
"Disconnecting power cords" on page 66
Ê
"Extending the server out of the rack" on page 69
Ê
If further required, remove the server from the rack as described in section
"Removing the server from the rack" on page
"Removing the server cover" on page 72
Ê
"Removing the air duct" on page 73
Ê
"Removing the fan box" on page 183
Ê

12.4.3 Removing the defective LSD module

"Removing the LSD module" on page 342
Ê

12.4.4 Installing the new LSD module

"Installing a LSD module" on page 339
Ê

12.4.5 Concluding steps

Perform the following procedures:
"Installing the fan box" on page 184
Ê
"Installing the air duct" on page 74
Ê
"Mounting the server cover" on page 76
Ê
"Sliding the server into the rack" on page 80
Ê
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page
"Connecting the server to the power source" on page 81
Ê
"Closing the rack door" on page 84
Ê
"Enabling BitLocker functionality" on page 107
Ê
RX300 S7
Upgrade and Maintenance Manual
Accessible drives
70.
77.
345